Home Share your WIDEPLOY Experience

Share your WIDEPLOY Experience

July 8th, 2017 in WIDEPLOY 300-365 Go to comments

Please share with us your experience after taking the WIDEPLOY 300-365 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…

Your posts are warmly welcome!

Please don’t ask for links to download copyright materials here…

Comments (50) Comments
Comment pages
1 3 4 5 6 7 8 983
  1. John J
    December 28th, 2018

    Passed today using Emma dumps 933/1000

  2. Isabella
    December 30th, 2018

    Passed too using them

    ebay.to/2zPvyRO

    980/1000

  3. Harish Sidhartha
    January 7th, 2019

    Please!!!

    Anyone kindly share the PassLeader 300-360/300-365/300-370/300-375 dumps collection?

    Thanks in advance!

    Anyone kindly share the PassLeader 300-360/300-365/300-370/300-375 dumps collection?

    Thanks in advance!

    Anyone kindly share the PassLeader 300-360/300-365/300-370/300-375 dumps collection?

    Thanks in advance!

  4. Meliodas
    January 12th, 2019

    Here a new question.

    Which value is the default RxSOP threshold on a WLC ?

    auto
    medium
    low
    high

  5. CST
    January 12th, 2019

    @
    The default RxSOP values as of 8.0 code for 2.4GHz and 5GHz is AUTO.

  6. Meliodas
    January 12th, 2019

    here other

    A network engineer is designing a high capacity WLAN for a conference area. The enterprise is concerned about non business traffic consuming excessive bandwidth and impacting performance. What can be used in the design to allow the controller to block or throttle applications?

    AVC
    RXSOP
    DSCP
    CMX

  7. Meliodas
    January 12th, 2019

    You are configuring a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two layer 2 security command do this requirement? (choose two)

    Static WEB + 802.1x
    CKIP
    802.1X
    WPA+WPA2
    Static WEP

    # An engineer is integrating a new cisco mobility services engine with cisco prime infrastructure to use CISCO CMX Location Analytics. Which feature required?

    enable context aware and CMX Browser Engage
    Enable tracking parameters in Cisco Mobility Service Engine
    Install Cisco Prime Infrastructure with floors maps
    Set history parameters in cisco mobility service engine

  8. Meliodas
    January 12th, 2019

    An engineer is configuring visitor connect on their Cisco MSE. Which URL must they use for their redirection URL?

    http://:8083/visitor/login.do
    http://:80384/fbwifi/forward
    http://:8084/visitor/login.do
    http://:8030/bwifi/forward

    Where must a VLAN tag be present for the client to be placed on a specific interface using Cisco Identity Based Networking?

    in a EAP request message
    in a RADIUS access request message
    in a RADIUS access accept message
    in a EAP response message

    A customer’s wireless network VLAN is rapidly exhausting IP addresses. The customer insists that the network range
    should not change, but he wants to address growing network needs. Due to poor network, design no additional network
    range surrounds the existing VLAN. Which action fullfith this requirement ?

    Create an SSID with a different name mapped to existing network range.
    Create an SSID with the same name mapped to a larger interface
    Add an interface and an interface group and change the existing SSID to map to it
    Add an expanded interface and change the existing SSID to map to it

  9. Meliodas
    January 12th, 2019

    A customer’s wireless network VLAN is rapidly exhausting IP addresses. The customer insists that the network range
    should not change, but he wants to address growing network needs. Due to poor network, design no additional network
    range surrounds the existing VLAN. Which action fullfith this requirement ?

    Create an SSID with a different name mapped to existing network range.
    Create an SSID with the same name mapped to a larger interface
    Add an interface and an interface group and change the existing SSID to map to it
    Add an expanded interface and change the existing SSID to map to it

  10. Meliodas
    January 12th, 2019

    Where must a VLAN tag be present for the client to be placed on a specific interface using Cisco Identity Based Networking?

    in a EAP request message
    in a RADIUS access request message
    in a RADIUS access accept message
    in a EAP response message

  11. Meliodas
    January 12th, 2019

    An engineer is configuring visitor connect on their Cisco MSE. Which URL must they use for their redirection URL?

    http: //:8083/visitor/login.do
    http: //:80384/fbwifi/forward
    http: //:8084/visitor/login.do
    http: //:8030/bwifi/forward

  12. Meliodas
    January 12th, 2019

    An engineer muus ensure that the number of client on a WLAN does not exceed the available number of IP addresses that are in the network. Which command ensures that a full /24 network does not associate at one time?

    config interface nat-address management enable
    config wlan max-associated-clients 250
    config wlan max-radio-clients 250
    config interface address dynamic-interface client 192.168.1.2 255.255.254.0 192.168.1.1

  13. Meliodas
    January 12th, 2019

    swith (config)# access-list 1 permit 10.1.0.0 0.0.255.255
    swith (config)# access-list 2 permit 1
    swith (config)# mls qos map policed-dscp 50 51 52 53 54 55 56 57 to 0
    swith (config)# mls qos aggregate-police transmit1 48000 800 exceed-action policed-dscp-
    transmit
    switch (config)# class-map ipclass1
    switch (config-cmap)# match access-group 1
    switch (config-cmap)# exit
    switch (config)# class-map ipclass2
    switch (config-cmap)# match access-group 2
    switch (config-cmap)# exit
    switch (config)# policy-map aggflow1
    switch (config-pmap)# class ipclass1
    switch (config-pmap-c)# trust dscp
    switch (config-pmap-c)# exit
    switch (config-pmap)# class ipclass2
    switch (config-pmap-c)# set dscp 56
    switch (config-pmap-c)# police aggregate transmit1
    switch (config-pmap-c)# exit

  14. Meliodas
    January 12th, 2019

    continue…

    switch (config-pmap)# exit
    switch (config)# interface gigabitethernet 0/1
    switch (config-if)# service policy input aggflow1
    switch (config-if)# exit

    Refer to the exhibit. You have network traffic from host 10.1.1.1 that has an average transmit rate of 64 kbps and is marked with DSCP.
    Which statement about the effect of the policy is true ?

    The DSCP value in the incoming packets is changed to 51
    The DSCP value in the incoming packets is is trusted
    The DSCP value in the incoming packets is untrusted and changed to 0
    The DSCP value in the incoming packets is changed to 56

  15. Meliodas
    January 12th, 2019

    The exam has 22 new questions, of which I have 20.
    These that I wrote are some of them.
    I need help in this one.

    https: / /meg a.nz /#F !VIAQmYQJ
    !JXUSrS6ibeyAdw3lKwn_Sg

    Refer to exhibit. You have a user who has a device that publishes its own service. What is the user doing from the My Devices Portal ?

    assigning exclusive access to a device or a user ID
    adding the device to the Cisco ISE device database
    adding mapping between the MAC address and mDNS
    configuring the mDNS service for a device

  16. CST
    January 12th, 2019

    @Meliodas

    A network engineer is designing a high capacity WLAN for a conference area. The enterprise is concerned about non business traffic consuming excessive bandwidth and impacting performance. What can be used in the design to allow the controller to block or throttle applications?

    AVC is the right answer for this question.

  17. CST
    January 12th, 2019

    An engineer is configuring visitor connect on their Cisco MSE. Which URL must they use for their redirection URL?
    Correct Answer is http://:8083/visitor/login.do

  18. Anonymous
    January 12th, 2019

    An engineer muus ensure that the number of client on a WLAN does not exceed the available number of IP addresses that are in the network. Which command ensures that a full /24 network does not associate at one time?

    Correct Answer: config wlan max-radio-clients 250

  19. CST
    January 12th, 2019

    Where must a VLAN tag be present for the client to be placed on a specific interface using Cisco Identity Based Networking?

    Correct Answer: in a RADIUS access request message

  20. CST
    January 12th, 2019

    An engineer is integrating a new cisco mobility services engine with cisco prime infrastructure to use CISCO CMX Location Analytics. Which feature required?

    Correct Answer: Enable tracking parameters in Cisco Mobility Service Engine

  21. CST
    January 12th, 2019

    You are configuring a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two layer 2 security command do this requirement? (choose two)

    Correct Answer: WPA+WPA2 and Static WEP

  22. CST
    January 12th, 2019

    A customer’s wireless network VLAN is rapidly exhausting IP addresses. The customer insists that the network range should not change, but he wants to address growing network needs. Due to poor network, design no additional network range surrounds the existing VLAN. Which action fulfill this requirement?

    My Answer is: Add an interface and an interface group and change the existing SSID to map to it

  23. CST
    January 12th, 2019

    Switch(config)# access-list 1 permit 10.1.0.0 0.0.255.255
    Switch(config)# access-list 2 permit 11.3.1.1
    Switch(config)# mls qos aggregate-police transmit1 48000 8000 exceed-action
    policed-dscp-transmit
    Switch(config)# class-map ipclass1
    Switch(config-cmap)# match access-group 1
    Switch(config-cmap)# exit
    Switch(config)# class-map ipclass2
    Switch(config-cmap)# match access-group 2
    Switch(config-cmap)# exit
    Switch(config)# policy-map aggflow1
    Switch(config-pmap)# class ipclass1
    Switch(config-pmap-c)# trust dscp
    Switch(config-pmap-c)# police aggregate transmit1
    Switch(config-pmap-c)# exit
    Switch(config-pmap)# class ipclass2
    Switch(config-pmap-c)# set dscp 56
    Switch(config-pmap-c)# police aggregate transmit1
    Switch(config-pmap-c)# exit
    Switch(config-pmap)# class class-default
    Switch(config-pmap-c)# set dscp 10
    Switch(config-pmap-c)# exit
    Switch(config-pmap)# exit
    Switch(config)# interface gigabitethernet0/1
    Switch(config-if)# service-policy input aggflow1
    Switch(config-if)# exit

    Refer to the exhibit. You have network traffic from host 10.1.1.1 that has an average transmit rate of 64 kbps and is marked with DSCP.
    Which statement about the effect of the policy is true ?

    Correct Answer is: The DSCP value in the incoming packets is is trusted

  24. CST
    January 13th, 2019

    Refer to exhibit. You have a user who has a device that publishes its own service. What is the user doing from the My Devices Portal?

    My Answer is assigning exclusive access to a device or a user ID

  25. Meliodas
    January 13th, 2019

    Must ensure that new service advertisement are learned if the SP-DB full mDNS setting ?

    MAC Priority
    mDNS gate
    Service Advertisiment
    LSS

  26. Meliodas
    January 13th, 2019

    Which two parameters are needed to initialize Cisco MSE for network operations? (choose two)
    SSH login
    SNMP community
    MAC address
    SHA certificate
    SMTP server

  27. Meliodas
    January 13th, 2019

    Which three values make up the combination for EASE calculation in AWPP path selection? (choose three)

    coefficient based on SNR
    SNR
    gain
    rx sensitivy
    hop value
    link budget

  28. Meliodas
    January 13th, 2019

    How many APs can be set as a master and what is the maximum number of slave APs for FlexConnect AP upgrades in a specific flexconnect 8.0 ver ?

    one master and two backup master AP per AP model
    one master and one backup master AP per AP model
    one master and three maximum slave APs per AP model
    one master and four maximum slave APs per AP model

  29. Meliodas
    January 13th, 2019

    You must use CISCO AVC on a WLC to prevent users from accessing a social media website. Which action do you configure a rule?

    drop
    mark
    deny
    rate-limit

  30. Meliodas
    January 13th, 2019

    Which feature is migrated from the Cisco Wireless LAN controller to the APs when deploying Flexconnect mode local switching compared to central switching to the access point ?

    802.11 association and reassociation
    monitoring for the presence of other APs
    encryption and decryption of 802.11 frames
    transmission of beacon frames

  31. CST
    January 13th, 2019

    Must ensure that new service advertisement are learned if the SP-DB full mDNS setting ?

    Ans: MAC Priority

  32. CST
    January 13th, 2019

    Which two parameters are needed to initialize Cisco MSE for network operations? (choose two)

    Answer: SNMP community & MAC address

  33. CST
    January 13th, 2019

    @Meliodas What do you think?

    Which two parameters are needed to initialize Cisco MSE for network operations? (choose two)
    Possible Answer: MAC address & SHA certificate

    MSE use its MAC address & Key Hash, based on this
    [root@mse ~]# cmdshell
    cmd> show server-auth-info
    invoke command: com.aes.server.cli.CmdGetServerAuthInfo
    AesLog queue high mark: 50000
    AesLog queue low mark: 500
    —————-
    Server Auth Info
    —————-
    MAC Address: 00:50:56:89:2b:4a
    SHA1 Key Hash: b45bfbec4db0403c55a9d094963ed259b108a243
    SHA2 Key Hash: a471b440b7dd6d972de9d4fe0733434ea6e0344ec2531d879a86df425ff1da39
    Certificate Type: SSC

  34. CST
    January 13th, 2019

    Which three values make up the combination for EASE calculation in AWPP path selection? (choose three)

    Answer:

    SNR
    hop value
    coefficient based on SNR

  35. CST
    January 13th, 2019

    How many APs can be set as a master and what is the maximum number of slave APs for FlexConnect AP upgrades in a specific flexconnect 8.0 ver ?

    Answer: one master and three maximum slave APs per AP model

  36. CST
    January 13th, 2019

    You must use CISCO AVC on a WLC to prevent users from accessing a social media website. Which action do you configure a rule?

    Answer: drop

  37. CST
    January 13th, 2019

    Which feature is migrated from the Cisco Wireless LAN controller to the APs when deploying Flexconnect mode local switching compared to central switching to the access point ?

    Answer: 802.11 association and reassociation

  38. Jeff01
    January 14th, 2019

    Congrats!

    Passed the 300-365 exam few days ago!

    9xx/1000 POINTS!

    Only learned that NEW PassLeader 300-365 dumps with 122 Q&As.

    Still 100% accurate!

    All questions were from PassLeader, valid enough for passing!

    Trying the PassLeader 300-365 dumps ASAP, all guys!

    Good luck!!!

  39. Minombre Miapellido
    January 17th, 2019

    PassLeader just updated its 300-365 dumps from the former 122q to the new 138q recently!

    Good luck!

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    PassLeader just updated its 300-365 dumps from the former 122q to the new 138q recently!

    Good luck!

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    PassLeader just updated its 300-365 dumps from the former 122q to the new 138q recently!

    Good luck!

  40. Anonymous
    January 17th, 2019

    @Minombre Miapellido

    where is the link of 138q

  41. Anonymous
    January 18th, 2019

    @300-365

    There is a lot of information about 300-375 here, this is valid.
    https:

    //tinyurl.com/y7lq5mtj

  42. Meliodas
    January 19th, 2019

    Hello everyone, I just passed the exam with 910, the questions that pass up are valid, thanks to @CST for helping me answer some questions.

    regards

  43. CST
    January 19th, 2019

    @Meliodas
    i will take my exam by nextweek hopefully i pass too. anything to share.

  44. Meliodas
    January 19th, 2019

    I pass the link with my vce with the answers, do you agree?

  45. Meliodas
    January 19th, 2019

    @CST, send me your email

  46. rt
    January 19th, 2019

    The battle report is coming. I passed the exam with a high score and recommended it to you.

    https: /
    /tinyurl.
    com/y8z2jedn

  47. CST
    January 19th, 2019

    @Meliodas
    {email not allowed}

  48. CST
    January 19th, 2019

    @Meliodas christan11 at g m a i l (dot)c o m

  49. Joseph Rubio
    January 21st, 2019

    Congrats!!! Passed the 300-365 exam recently!!!

    A lot of new questions appeared in my actual 300-365 test, old version 300-365 dumps are NOT valid enough for passing now! DO NOT WASTE TIME ON THEM!!!

    And, I learned the latest PassLeader 300-365 dumps (138Q~~~Updated Recently), almost all NEW questions are available in PassLeader, stable and valid enough for passing!!!

    Good luck, all!!!

    p.s.

    Part of PassLeader 300-365 dumps FYI:

    drive.google.com/open?id=0B-ob6L_QjGLpR3dFYkJubjFZaDQ

    Part of PassLeader 300-360 dumps FYI:

    drive.google.com/open?id=0B-ob6L_QjGLpWVVreDl3bGRhakk

    Good luck!

  50. Joseph Rubio
    January 21st, 2019

    What’s More:

    Part of PassLeader 300-370 dumps FYI:

    drive.google.com/open?id=0B-ob6L_QjGLpM3ZXaF9TdmZSeUU

    Part of PassLeader 300-375 dumps FYI:

    drive.google.com/open?id=0B-ob6L_QjGLpQ2hZQ0c4c2d1QjA

    Good luck!

Comment pages
1 3 4 5 6 7 8 983